SAAPedia EN Microcapsule
logo

MEA PPG laureth carboxylate

Time: 2013-06-13 05:07:23; Count: 14

MEA PPG laureth carboxylate

Synonyms

Poly(oxy-2,1-propanediyl)poly(oxy-1,2-ethanediyl), alpha-dodecyl-omega-carboxymethoxy-, 2-aminoethanol salts;

Category

Anionic Surfactant

> Carboxylate

>> Polyether Carboxylate

>>> Alkyl Polyether Carboxylate

>>>> Linear Alkyl Polyoxypropylene Polyoxyethylene Ether Carboxylate

Chemical Numbering System

CAS: N/A

EINECS: N/A

Molecular Formula & Molecular Weight

Molecular Formula: (C3H6O.C2H4O)xC14H28O3.C2H7N1O

Molecular Weight: N/A

Structure

Properties

Appearance    (1), liquid; or solid.

Solubility    slightly soluble to soluble in water.

Stability    stable.

Risk    Liquid form: irritation, irritation to skin, eye.

GHS label: 

Ecology    may be hazardous to environment. Water body should be given special attention.

Biodegradability    biodegradable.

Characteristics    excellent cleansing, emulsifying, dispersing, wetting, permeating, solubilizing, lubricating abilities. Performance varies with EO number, PO number. The foaming ability can be controlled by adjusting EO/PO ratio.

Note    (1), 1,4-dioxane generated during polyether preparation: probable carcinogen. However, can be acceptable when concentration of 1,4-dioxane is less than 30ppm or less.

(2), Should not be used in children products that can be direct prolonged contact with the skin, such as skin care products.

(3), Avoid using in children cleaning products, such as shampoos.

(4), Do not use in nitrosating environment. Reaction of monoethanolamine and nitrous acid can not produce nitrosamines, however, reaction of contained secondary amine of monoethanolamine and nitrous acid can produce nitrosamines. Nitrosamine is a carcinogen.

Synthesis

 

Quality Standards & Test Methods

1, Physical and chemical indexes

Item

Physical and chemical indexes

Liquid

Actives, %, ≥

30.0

NaCl*, %, ≤

0.5

Chloroacetic acid*, ppm, ≤

10

*: Only applicable to products using chloroacetic acid process.

Test Methods

(1), Actives

GB/T 13173 Surface active agents -- Detergents -- Testing methods

GB/T 5173 Surface active agents and detergents -- Determination of anionic-active matter by direct two-phase titration procedure

ISO 2271 Surface active agents -- Detergents -- Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure

(2), NaCl

QB/T 2950 Alkylpolyethoxy Carboxylate

(3), Chloroacetic acid

QB/T 2950 Alkylpolyethoxy Carboxylate

2, Hazardous substances indexes

Item

Hazardous substances indexes

Solid / liquid

Heavy metals (as Pb), mg/kg, ≤

20

As, mg/kg, ≤

3

Test Methods

(1), Heavy metals (as Pb)

Safety and Technical Standards for Cosmetics (2015 Edition)

GB/T 30799 The test method of food detergents -- Determination of heavy metals

(2), As

Safety and Technical Standards for Cosmetics (2015 Edition)

GB/T 30797 The test method of food detergents -- Determination of total arsenic

3, Further explanation

(a), On physical and chemical indexes: firstly, shall be indicated carbon atom distribution; secondly, shall be indicated average molecular weight.

(b), Used in cosmetics, should be test for harmful substances or furtherly test for microorganisms, according to local regulations and standards.

Major Uses

1, Typical applications

Use as cleansing agent.

Use as emulsifying agent, dispersing agent.

Use as solubilizing agent.

Use as wetting agent, permeating agent.

Use as lubricant.

2, Personal care products

Cleansing agent, emulsifying agent in personal care products.

*  *  *  *  *  *

Further information:

(1), In accordance with EU regulations (EC) No 1223/2009, directive 2003/83/EC, monoethanolamine and its salts are included in Annex III/61.

Maximum concentration of secondary amine is 0.5% in products.

In raw materials, maximum secondary amine content is 0.5%.

Maximum nitrosamine content is 50μg/kg.

The container is nitrite-free.

(2), In accordance with Safety and Technical Standards for Cosmetics (2015 Edition) of China, monoethanolamine and its salts are the restricted components.

In raw materials, maximum secondary amine content is 0.5%.

Maximum nitrosamine content is 50μg/kg.

The container is nitrite-free.

3, Machinery

Emulsifying agent, cleansing agent in water-based metalworking fluids.

4, Industrial cleaning

Cleansing agent in industrial cleaning.

Cleansing agent (low foaming product) in spray cleaning.

5, Textile, leather

Cleansing agent, degreasing agent in textile, leather.

Product members

MEA PPG-6 laureth-7 carboxylate;

Manufacturers

 

Update: 20131111(1); 20181126(2);

Article

[Terminology] Dispersion system

[Terminology] Vesicle

Pandect of Ester surfactants (1): Definition

[Terminology] Van Der Waals force

[Terminology] Micellar aggregation number

Standard

Test methods of surfactants, catalog, Chinese national standards

Surfactants, catalog, Chinese national standards